Air to Air Thermal Shock Test Chamber
Hot Cold Temperature Resistance Test Machine Thermal Cyclic Tests for Electrical
Three Zones Thermal Shock Test Chamber is used to test the bearing extent of the material structures and composite material in an instant and continuous high temperature and extremely low temperature environment, that is in the shortest time to test its thermal expansion and contraction caused by chemical change or physical harm, which is widely used in metal, plastic, rubber, electronics and other materials and it can be used as an important reference for improving product quality.
Thermal Shock Test Chamber Three Zone Structures:
High low temperature(Three Zone)Thermal shock chamber is consist of High temperature test area(Pre-heating area), Low temperature test area(Pre-cooling)area and test area(RT), adopt independent wind path switching mode to transfer hot and cold air to test area make sure the high low temperature swift, the test sample shall not move during the test.
Standards Implement and Met
GB/T 2443.1-2001 Test A: Low temp. Test;
GB/T 2443.2-2001 Test B: Low temp. Test;
GB/T 2443.22-2002 Test N: Low temp. Test;
GJB 150.3-1986 High Temp. Test;
GJB 150.4-1986 Low temp. Test;
GJB 150.5-1986 Temp. Impact Test; (Load refer to 5.5.5 no active load)
Thermal Shock Test Chamber- Technical specification:
| Model | SM-50-3P-B |
| Temp. range | -70°C ～180°C |
| Temperature shock range | -55°C ～150°C |
| Precooling time | 25°C(RT) ～-70°C, within 60 min 1.5°C ~ 3.0°C/min |
| Preheating time | 25°C(RT) ～180°C, within 60 min 3.0°C ~ 7.0°C/min |
| Temperature conversion time | 3S |
| Temperature conversion time | within 5 mins |
| Interior material | Stainless Steel Plate ( SUS 304) |
| Exterior material | A3 plate with power coating |
| Inner size (WxHxD) mm | 350x400x350 |
| Working volume | 50L |
| Power supply | AC 380V±10％ 50Hz ,3 phase |
| Controller | SANWOOD SH5600 7.0 inch controller Equipped with RS232 port；USB data export |
| Note: 1. We reserve the right to change specifications without prior notice 2. Customized sizes and configurations available. |
Thermal Shock Test Chamber- Product accessories
1 Standard equipment
Test product load power supply 3 groups
Each side of the left and right side has a 50mm Pin hole
Pin hole silicone plug 2 PCS
Stainless steel sample holder 2 PCS
Compressed air drying filter
Thermal Shock Test Chamber -Optional equipment
Isolated transducer, Protection device for testing product ( Sample protection to meet the standards NE60519-2.1993)
100mm diameter Pin hole
Nitrogen auxiliary device
Spare parts package
E management and Networking software
Video monitoring system
APP mobile platform management
Product Tags:
|
|
Air To Air Thermal Shock Test Chamber Temperature Resistance Images
|
